Rockwell Automation 20D PowerFlex 700S and 700H Frame 12 DC Bus Connector Kit - Manual (Page 10)

Publication PFLEX-IN022A-EN-P
10 PowerFlex® 700S and 700H Frame 12 DC Bus Connector Kit
Step 5: Assemble the
Right Side Support Bracket Identify the following parts:
• Rittal Mounting Rail (1)
• Support Bracket (1) and hardware
• M10 Insulated Standoff (1 - larger size) and hardware
1. Secure the support bracket to the right side mounting rail, in the position
shown below, using the M4x16 bolt, flat and lock washer and hex nut.
279 mm
(11 in.)
Note: the hooks on the ends of the
mounting rail must point down.