Rockwell Automation 20D PowerFlex 700S and 700H Frame 12 DC Bus Connector Kit - Manual (Page 21)

PowerFlex® 700S and 700H Frame 12 DC Bus Connector Kit 21
Publication PFLEX-IN022A-EN-P
Step 12: Install the DC+ Bus
Bar Assembly and Fuse 1. Insert, from right to left, the long end of the L-shaped DC+ bus bar into and
through the insulated grommet (in the air flow plate) furthest from the front
of the enclosure as shown below.
Note: previously installed parts not shown for clarity only.