Rockwell Automation 44887-PUB, 44887 Enwatch - Manual (Page 17)

Publication GMSI10-UM031C-EN-E - January 2009
Installing the Enwatch 13
7. Select 3 - Assign Host IP, and set your Enwatch unit to one of your
plant specific IP addresses.
8. Select 4 - Assign Host UDP Port, and set it to 4242. This is the default
port number and cannot be any other number.
Intelligent Transducer Adapter Type 1) V 1.2
Copyright Icon Research Ltd 1998/99
Configure Adapter Menu:
1 - Default Settings
2 - Assign Host MAC
3 - Assign Host IP
4 - Assign Host UDP Port
5 - Assign Subnet Mask
6 - Assign Gateway IP
7 - Assign Name
8 - Assign Network Option
9 - Assign Debug Level
ESC - Back to Main Menu
Make your selection (1-9) : 3
Assigning Host IP
Current Host IP : 200.100.200.100
Enter New Address or ESC to abandon :
Intelligent Transducer Adapter Type 1) V 1.2
Copyright Icon Research Ltd 1998/99
Configure Adapter Menu:
1 - Default Settings
2 - Assign Host MAC
3 - Assign Host IP
4 - Assign Host UDP Port
5 - Assign Subnet Mask
6 - Assign Gateway IP
7 - Assign Name
8 - Assign Network Option
9 - Assign Debug Level
ESC - Back to Main Menu
Make your selection (1-9) : 4
Assigning Host UDP Port
Current Host UDP Port : 4242
Enter New Port or ESC to abandon :