Rockwell Automation 44887-PUB, 44887 Enwatch - Manual (Page 30)

Publication GMSI10-UM031C-EN-E - January 2009
26 Installing the Enwatch
Then select Setup>Transducer to select the “Temperature” transducer in the
collection specification.
In Emonitor, define a numeric measurement definition with the temperature
units and the “Temperature” collection specification.
Transducer bias reading
Enwatch can take transducer bias readings; however, this is not a transducer
check function that detects transducer failure before taking data. The bias
reading is an independent reading with a different signal path on the Enwatch
board.
First in Emonitor, select Setup>Transducer to define a new transducer
name, for example, “Transducer Check.”