Controller mounting dimensions, Install the motor – Rockwell Automation MinPak Plus DC Drive User Manual User Manual
Page 13
Advertising
![background image](/manuals/581192/13/background.png)
3:2
Controller Mounting
Dimensions
Figure 3Ć2. Controller Mounting Dimensions.
Install The Motor
1. Verify that the motor is the
appropriate rating to use with the
controller.
2. Install the DĆC motor in
accordance with its own
installation instructions.
3. Make sure that coupled
applications have proper shaft
alignment with the driven
machine or that belted
applications have proper
sheave/belt alignment to
minimize unnecessary motor
loading.
Advertising