Rockwell Automation MinPak Plus DC Drive User Manual - Manual (Page 49)

A:2
Table AĆ1. Controller Model Numbers
Model Number Optional
Transf.
KVA
Enclosed Chassis HP VAC
(3)
AĆC
Amps
(RMS)
DĆC
Arm.
(Volts)
DĆC
Arm.
Amps
Avg.
DĆC
Field
Volts
Amp.
MAX
Power
Supply
Capacity (2) MAX MIN
14C10 14C20 1/4 115 3.5 90 2.5 100 3.0 1000 40.0 0.50
1/3 115 5.2 90 3.7 100 3.0 1000 40.0 0.75
1/2 115 7.0 90 5.0 100 3.0 1000 40.0 1.50
3/4 115 10.5 90 7.5 100 3.0 1000 40.0 1.50
14C11 14C21 1/2 230 3.5 180 2.5 200 3.0 1000 40.0 1.50
3/4 230 5.2 180 3.7 200 3.0 1000 40.0 1.50
1 230 7.0 180 5.0 200 3.0 1000 40.0 2.00
1 1/2 230 10.5 180 7.5 200 3.0 5000 40.0 3.00
14C12 14C22 2 230 14.0 180 10.0 200 3.0 1 5000 40.0 5.00
3 230 21.0 180 15.0 200 3.0 1 5000 40.0 10.0
14C13 14C23 5 230 35.0 180 25.0 200 3.0 1 5000 40.0 10.0
1 Standard
2 Maximum permissible available symmetrical RMS fault current (amperes) with NEC or CEC external approved disconnect.
3 Does not include current required for Field Supply (if used).
Table AĆ2. Local Operator Control Faceplates
Specify
Operator's
Functions Provided 1
When Using A
MinPak Plus
Controller With:
Operator's
Control
Faceplate
Model
Start/
Stop
SpeedĆ
setting
Pot
TorqueĆ
setting
Pot
Run/
Jog
Selector
Forward/
Reverse
Selector
Automatic/
Manual
Selector
Blank Faceplate (Use with
Remote Station) 14C200 no no no no no no
BasicFeatures 14C201 yes yes no yes no no
BasicFeatures Plus ArmaĆ
tureĆReversing 14C202 yes yes no yes yes no
BasicFeatures Plus AutoĆ
matic/Manual Modes of
Operation 14C203 yes yes no yes no yes
BasicFeatures Plus ArmaĆ
tureĆReversing and AutoĆ
matic/Manual Modes of
Operation 14C204 yes yes no yes yes yes
BasicFeatures Plus Torque
Control 14C205 yes yes yes yes no no
BasicFeatures Plus ArmaĆ
tureĆReversing and Torque
Control 14C206 yes yes yes yes yes no