Rockwell Automation MinPak Plus DC Drive User Manual - Manual (Page 22)

3:11
28
20
126
426
BUFFER
28
20
126
26
BUFFER BOARD
B/M 0Ć57005
REGULATOR BOARD
B/M 0Ć57101
J4
LVTU
MINSPEED (P1)
Common
MAX SPEED (P2)
+11.2v
5K
OPERATOR'S
SPEED
REF
POT
Figure 3Ć10. Reference Circuit for Manual Operator's Speed Reference Circuit.
28
20
126
426
BUFFER
28
20
126
26
BUFFER BOARD
B/M 0Ć57005
REGULATOR BOARD
B/M 0Ć57101
J4
LVTU
MINSPEED (P1)
Common
MAX SPEED (P2)
+11.2v
326 326
ADD JUMPER FROM
326 TO 426 ONTHE
BUFFER BOARD
Common
26
326
57
BUFFER
J1
+
-
FOLLOWER
REFERENCE
INPUT
TYPICAL REFERENCE KIT
Figure 3Ć11. Reference Circuit for Follower Reference Kit without the use of the
Manual Operator's Reference Option.
In this configuration (see Figure
3Ć11), the J1 jumper on the
Reference Kit Board is to be cut and
a jumper added between terminals
326 and 426 of the Buffer Board.
This inserts the reference signal
through the reference buffer circuit
to pin 26 of the Regulator Board.
The J4 jumper on the Regulator
Board is not to be removed in this
configuration (see Figure 3Ć11).