Rockwell Automation MinPak Plus DC Drive User Manual - Manual (Page 5)

1:1
1: Receive and Accept the MinPak Plus
Controller
Receive and Accept the
Shipment
The RelianceR Electric MinPak Plus
SingleĆPhase DĆC Drive (herein
referred to as the Controller) has
been designed, manufactured and
thoroughly tested to provide many
years of reliable service. The
shipping container in which you
received your Controller has been
specifically designed to protect it
during transportation and handling.
Reliance Terms of Sale, in all
instances, are Freight On Board
(F.O.B.) point of origin. It is your
responsibility to thoroughly inspect
the equipment before accepting
shipment from the transportation
company.
If any of the items called for on the
bill of lading or express receipt are
damaged or are not included, do
not accept the shipment until the
freight or express agent makes an
appropriate notation on your freight
bill or express receipt.
The consignee is responsible for
making claim against the carrier for
any shortage or damage occurring
in transit. Claims for loss or damage
in shipment must not be deducted
from the Reliance invoice, nor
should payment of the Reliance
invoice be withheld while awaiting
adjustment of such claims since the
carrier guarantees safe delivery.
If considerable damage has been
incurred and the situation is urgent,
contact the nearest Reliance Sales
Office for assistance. To find the
nearest Reliance Electric Sales
Office for assistance, call tollĆfree
1Ć800Ć245Ć4501.
Store the Controller
After receipt inspection, repack the
Controller in its original shipping
container until ready for installation.
To ensure satisfactory operation at
startup and to maintain warranty
coverage, store the controller as
follows:
D In its original shipping container
in a clean, dry, safe place;
D In an ambient temperature that
does not exceed 65_C (149_F)
or goes below Ć30_C (Ć22_F);
D Within a relative humidity range
of 5 to 95% without
condensation;
D Away from a corrosive
atmosphere. In harsh
environments, cover the
shipping/storage container.
D At an altitude of less than 3,000
meters (10,000 ft.) above sea
level.
File a Return Request
To return the Controller, send a
written request to Reliance Electric
within ten days of receipt. Do not
return equipment without a
numbered Equipment Return
Authorization Form, available from
your local Reliance Electric Sales
Office. To find the nearest Reliance
Electric Sales Office for assistance,
call tollĆfree 1Ć800Ć245Ć4501.
Reliance Electric reserves the right
to inspect the equipment on site.
Drive Identification
Nameplate
Your controller has a nameplate on
the front cover which identifies the
specific model number design,
applicable AĆC input power and DĆC
output power data. Refer to the
nameplate in Figure 1Ć1. All
communications concerning this
product should refer to the
appropriate model number
information.
The technical power information
should be referenced to verify
proper power application.
RELIANCE ELECTRIC COMPANY, CLEVELAND, OHIO 44117 USA 417197Ć47
MINPAK PLUS M/N
SER NO
AC INPUT VOLTS MAX AMPS HZ PH
SHORT CIRCUIT SYM RMS RATING
ENCLOSURE
KVA [email protected]
AC OUT āā VOLTS MAX AMPS
I/M
LISTED IND.
CONT. EQ 882R
R
14C10U
U0001ĆXS
5 DĆ3838Ć5
50/60 1 35 230
180
25
5000 AMPS
ENCLOSED W/D30001
WMS
Figure 1Ć1. Typical MinPak Plus Nameplate.