Rockwell Automation 440R MSR312 Configurable Monitoring Safety Relay w/DeviceNet Communications - Manual (Page 28)

Configurable Monitoring Safety Relay with DeviceNet™ Communications
Chapter 3: Quick Start Guide
28 MSR312-UM001B-EN-P
Step 2. Create PanelView project.
Open Panel Builder to configure the PanelView 600 Touch (PV600) for DeviceNet. Click "New Project" and select "Creat a new
application" to open the configuration dialog box.
Name the project and choose the appropriate PanelView in the "Type" list. Highlight DeviceNet to enable the PV600 Touch for
DeviceNet communications and confirm your configuration by clicking "OK".
For more information on PanelView configuration, refer to the Panel ViewManual (Publication 6556-5.8).
The PanelView connections to other devices are created using addresses in the Tag Form dialog or Tag Editor.
For Read Tags: PanelView (client) initiates communications with Explicit "Get" message to obtain input data from the
MSR312P (Server). The MSR312P responds by sending data.
For Outputs: PanelView (Client) device sends data using Explicit "Set" Message to set output data. The MSR312P responds
that data has been received.
Note: Only Get_Attribute_Single and Set_Attribute_Single commands are supported. For PanelView objects with Explicit
Client addressing:
• Get_Attribute_Single: The PanelView sequentially scans values addressed to PanelView objects in the current screen (or
global objects) and reads data from the external server device.
• Set_Attribute_Single: The PanelView sends values to the external device when a change of state is detected on that
input.