Rockwell Automation 440R MSR312 Configurable Monitoring Safety Relay w/DeviceNet Communications - Manual (Page 29)

Configurable Monitoring Safety Relay with DeviceNet™ Communications
Chapter 3: Quick Start Guide
MSR312-UM001B-EN-P 29
Step 3. Using Read Tag to indicate Input1a state.
It is intended to display the Input 1 status of the First MSR320 Input module (Input 1a). For this a Multistate Indicator Object is
used as a Read Tag Select "Indicators" within the "Objects" menu and then "Multistate" to insert the indicator box into the Panel
View screen.
A double click on the Indicator box within the screen opens the dialog to configure the Tag.
Click "Edit Tag…" to configure the Read Tag and connection. Verify if the "Value" box is checked. The Read Tag "Data Format"
should be the same as Parameters data size configured in the "Tag Form" dialog.
The Tag must be configured according to its description within the EDS-File. To indicate "Input1a" Parameter 1 is used. (refer to
Parameter description).