Additional resources, Introduction – Rockwell Automation 20D PowerFlex 700S/700H Frames 10...14 IP00, NEMA/UL Open Power Structures User Manual
Page 2
2
Rockwell Automation Publication PFLEX-IN020C-EN-P - July 2013
PowerFlex 700S and 700H Frames 10...14 IP00, NEMA/UL Open Power Structures
Additional Resources
These documents contain additional information concerning related products
from Rockwell Automation.
You can view or download publications at
To order paper copies of technical
documentation, contact your local Allen-Bradley distributor or Rockwell
Automation sales representative.
Introduction
A power structure can contain a Non-Regenerative Front-End (NFE) converter
module(s) and inverter modules or only NFE converter modules or inverter
modules. The power structures can be installed in any enclosure that meets the
requirements specified in this manual. Throughout this manual, the Rittal TS8 is
used as an example enclosure. Some items shown in a Rittal enclosure are non-
standard components and will require fabrication. Frames 10…14 can use the
components listed in
Table 1
and
Table 2
on page
3
:
Resource
Description
Industrial Automation Wiring and Grounding
Guidelines, publicatio
Provides general guidelines for installing an Allen-Bradley®
industrial automation system that may include
programmable controllers, industrial computers, operator-
interface terminals, display devices, and communication
networks.
Preventive Maintenance of Industrial Control and
Drive System Equipment, publication
Provides a checklist as a guide in performing preventive
maintenance on industrial control and drive system
equipment.
Safety Guidelines for the Application, Installation,
and Maintenance of Solid State Control, publication
Provides general guidelines for the application, installation,
and maintenance of solid state control in the form of
individual devices or packaged assemblies incorporating solid
state components.
Guarding Against Electrostatic Damage, publication
This document explains the causes of ESD, and how you can
guard against its effects.
Wiring and Grounding Guidelines for Pulse Width
Modulated AC Drives, publication
Provides basic information needed to properly wire and
ground Pulse Width Modulated (PWM) AC drives.
PowerFlex 700S and 700H, Frames 9…14, AC Drives
Installation Instructions, publication
Provides instructions for the mechanical installation and for
connecting incoming power, the motor, and basic I/O to
enclosed Frame 9…14 PowerFlex 700S and 700S adjustable
frequency AC drives.
PowerFlex 700H AC Drives Programming Manual,
publicatio
Provides information needed to start-up, program, and
troubleshoot the PowerFlex 700H AC drive.
PowerFlex 700S AC Drives Programming Manual,
publicatio
Provides information needed to start-up, program and
troubleshoot the PowerFlex 700S Phase II AC drive.
PowerFlex 700S Drives with Phase II Control Reference
Manual, publication
Provides detailed PowerFlex 700S drives with Phase II control
functions and application programming examples.
Product Certifications website,
Provides declarations of conformity, certificates, and other
certification details.