Rockwell Automation 20D PowerFlex 700S/700H Frames 10...14 IP00, NEMA/UL Open Power Structures - Manual (Page 27)

Rockwell Automation Publication PFLEX-IN020C-EN-P - July 2013 27
PowerFlex 700S and 700H Frames 10...14 IP00, NEMA/UL Open Power Structures
Table 14 - 600V AC Input Protection Devices
Drive Catalog
Number
Fram
e
HP Rating Input
Ratings Dual Element Time Delay Fuse Non-Time Delay Fuse Bussmann Style Semi-
Conductor Fuse Circuit
Breaker
(6)
Motor Circuit
Protector
(8)
ND HD Amps Min. (3) Max. (4) Min. (3) Max. (4) Max (7) Max.
20xE261 10 250 – 252 325 575 325 775 170M5813 700 350
– 200 201 275 450 275 600 170M5813 600 300
20xE325 10 350 – 314 400 725 400 950 170M5813 900 450
– 250 252 325 575 325 775 170M5813 750 400
20xE385 10 400 – 372 475 850 475 1100 170M5813 1100 500
– 350 314 400 725 400 950 170M5813 900 450
20xE416 10 450 – 402 525 900 525 1200 170M5813 1200 550
– 350 314 400 725 400 950 170M5813 900 450
20xE460 11 500 – 444 575 (1 per phs)
300 (2 per phs) 1000 575 (1 per phs)
300 (2 per phs) 1300 170M8547 1300 600
– 400 372 475 (1 per phs)
250 (2 per phs) 850 475 (1 per phs)
250 (2 per phs) 1100 170M8547 1100 500
20xE502 11 500 – 485 625 (1 per phs)
325 (2 per phs) 1100 625 (1 per phs)
325 (2 per phs) 1500 170M8547 1500 650
– 500 444 575 (1 per phs)
300 (2 per phs) 1000 575 (1 per phs)
300 (2 per phs) 1300 170M8547 1300 600
20xE590 11 600 – 570 725 (1 per phs)
375(2 per phs) 1300 725 (1 per phs)
375(2 per phs) 1700 170M5813 1700 800
– 500 485 625 (1 per phs)
325 (2 per phs) 1100 625 (1 per phs)
325 (2 per phs) 1500 170M5813 1500 700
20xE650 12 700 – 628 800 (1 per phs)
400 (2 per phs) 1400 800 (1 per phs)
400 (2 per phs) 1900 170M5813 1900 900
– 650 570 725 (1 per phs)
375 (2 per phs) 1300 725 (1 per phs)
375 (2 per phs) 1700 170M5813 1700 800
20xE750 12 800 – 724 950 (1 per phs)
475 (2 per phs) 1600 950 (1 per phs)
475 (2 per phs) 2200 170M5813 2200 1000
– 700 628 800 (1 per phs)
400 (2 per phs) 1400 800 (1 per phs)
400 (2 per phs) 1900 170M5813 1900 900
20xE820 (1) 12 900 – 792 1000 (1 per phs)
500 (2 per phs) 1800 1000 (1 per phs)
500 (2 per phs) 2400 170M5813 2400 1100
– 700 628 800 (1 per phs)
400 (2 per phs) 1400 800 (1 per phs)
400 (2 per phs) 1900 170M5813 1900 900
20xE920 13 1000 – 888 1200 (1 per phs)
600 (2 per phs) 2000 1200 (1 per phs)
600 (2 per phs) 2700 170M6466 (5) 2700 1200
– 900 792 1000 (1 per phs)
500 (2 per phs) 1800 1000 (1 per phs)
500 (2 per phs) 2400 170M6466 (5) 2400 1100
20xE1K0 13 1100 – 994 1300 (1 per phs)
650 (2 per phs) 2300 1300 (1 per phs)
650 (2 per phs) 3000 170M6466
(5)
3000 1300
– 1000 888 1200 (1 per phs)
600 (2 per phs) 2000 1200 (1 per phs)
600 (2 per phs) 2700 170M6466 (5) 2700 1200
20xE1K1 13 1300 – 1139 1500 (1 per phs)
750 (2 per phs) 2600 1500 (1 per phs)
750 (2 per phs) 3500 170M6466 (5) 3500 1500
– 1100 994 1300 (1 per phs)
650 (2 per phs) 2200 1300 (1 per phs)
650 (2 per phs) 3000 170M6466 (5) 3000 1300
20xE1K5 14 1000 – 1448 1900 (1 per phs)
650 (3 per phs) 3300 1900 (1 per phs)
650 (3 per phs) 4500 170M6466 4500 1900
– 900 1255 1600 (1 per phs)
550 (3 per phs) 2900 1600 (1 per phs)
550 (3 per phs) 3900 170M6466 3900 1700
20xE1K9 (2) 14 1100 – 1834 2300 (1 per phs)
800 (3 per phs) 4200 2300 (1 per phs)
800 (3 per phs) 5700 170M6466 5700 2400
– 1000 1448 1900 (1 per phs)
650 (3 per phs) 3200 1900 (1 per phs)
650 (3 per phs) 4500 170M6466 4500 1900
20xE2K2
(2)
14 1200 – 2172 2800 (1 per phs)
950 (3 per phs) 5000 2800 (1 per phs)
950 (3 per phs) 6700 170M6466 6700 2900
– 1100 1834 2300 (1 per phs)
800 (3 per phs) 4200 2300 (1 per phs)
800 (3 per phs) 5700 170M6466 5700 2400
(1) 20DE820 drives (ND) are only capable of producing 95% of starting torque under 10 Hz.
(2) Not available with 700S Control.
(3) Minimum protection device size is the lowest rated device that supplies maximum protection without nuisance tripping.
(4) Maximum protection device size is the highest rated device that supplies drive protection.
(5) These fuses and disconnect are supplied with AC input NEMA/UL Type 1 drives.
(6) Inverse time breaker. Ratings shown are maximum.
(7) Maximum allowable rating by US NEC. Exact size must be chosen for each installation.
(8) Motor Circuit Protector - instantaneous trip circuit breaker. For US NEC minimum size is 125% of motor/drive FLA. Ratings shown are suggested. Instantaneous trip settings must be set to US NEC code. Not to exceed 1300% FLA.