Rockwell Automation 20D PowerFlex 700S/700H Frames 10...14 IP00, NEMA/UL Open Power Structures - Manual (Page 52)

52 Rockwell Automation Publication PFLEX-IN020C-EN-P - July 2013
PowerFlex 700S and 700H Frames 10...14 IP00, NEMA/UL Open Power Structures
Figure 39 - Frames 13 and 14
Other Component
Installation For installation of devices such as circuit breakers, fuses, EMC grounding etc. it is
recommended that an installation plate be mounted in front of the AC choke.
The bottom portion must be left open for air circulation. Fuses must be user
supplied.
U/T1 V/T2 W/T3
U/T1 V/T2 W/T3
Side View
U/T1 V/T2 W/T3
U/T1 V/T2 W/T3
Side View
Output Power Terminals
when du/dt Filters Not Installed
Output Power Terminals when
du/dt Filters Installed
Output Power Terminals
when du/dt Filters Not Installed
Output Power Terminals when
du/dt Filters Installed
Inverter Power Structures
Shown Only
Busbars Connecting Output Power Terminals to du/dt
Filters Supplied by Customer