Toshiba RAV-SM560A - Manual (Page 70)

–
146
–
4. Setup of the day of the week
• Set the today of the week.
(Example: Case of Wednesday)
1
While push SET button push
DAY
button to select “today” of the week.
• While pushing SET button, each push
DAY button, the display of the present
day of the week flashes, and the display
moves in order.
1
First push
PROGRAM
button.
• When pushing PROGRAM button, the reserve mark
flashes.
2
Push DAY button, select the day for operation and
then push SET button.
When pushing
SET
button, the flashed reserve mark
changes, and ON time of the program 1 flashes at the
same time.
CAUTION
• The day of the week cannot be changed only when DAY button is pushed.
• If 30 seconds have passed while the button is flashing without pushing DAY or HH / MM
buttons, the display returns automatically to the original display (Normal display).
In this case, repeat the procedure from the 1st step.
5. How to set program timer operation
Set the present time and the present day of the week surely, otherwise the program
operation is not correctly performed.
This timer can control up to 3 cycle program per day.
(1 cycle or 2 cycles can be also set up.)
The following items can be set to the program operation.
• Setup of [ON] ® [OFF] time ([ON] or [OFF] only cannot be set up singly.
<Name and functions>
Su MoTu WeTh Fr Sa
WEEKLY TIMER
ERROR
SuMoTuWeTh Fr Sa
PROGRAM1
PROGRAM2
PROGRAM3
CHECK
PROGRAM SET DAY
HH MM CLEAR
CANCEL
1
WEEKLY TIMER
ERROR
SuMoTuWeTh Fr Sa
PROGRAM1
PROGRAM2
PROGRAM3
CHECK
PROGRAM SET DAY
HH MM CLEAR
CANCEL
Operation time of program 1
Operation time of program 2
Operation time of program 3
Example:
To set the operation time of Monday as follows:
From 8:00 to 12:00
From 12:40 to 16:50
From 17:00 to 19:00
Operates
2
1
SuMoTuWeTh Fr Sa
PROGRAM1
PROGRAM2
PROGRAM3
3
Set ON time by HH , MM buttons,
and then push
SET
button.
When push SET button, the
flashed ON time (8:00 in example)
change, and OFF time of the
program 1 flashes at the same
time.
WEEKLY TIMER
ERROR
SuMoTuWeTh Fr Sa
PROGRAM1
PROGRAM2
PROGRAM3
CHECK
PROGRAM SET DAY
HH MM CLEAR
CANCEL
3, 4
3, 4, 5
6
7
Setting to other da y, repeat abo ve pr ocedure fr om
1
to
6
.
If you need to set the same time as previous setting. Refer to “7. How to copy the
program operation time”.
CAUTION
• Setup of the program time : is treated as .
(Example) In the following cases, setup are available.
ON time OFF time
• If 30 seconds have passed while the button is flashing without pushing DAY or HH / MM
buttons, the display returns automatically to the original display (Normal display).
In this case, repeat the procedure from the 1st step.
4
Set OFF time by HH / MM buttons, and then push SET
button.
When pushing
SET
button, the flashed ON time (12:00 in
example) changes, and ON time of the program 2 flashes.
5
Next set up the operation time to the program 2 and 3.
When pushing SET button after OFF time of the program
3 has been set, the flashed OFF time (19:00 in example)
changes and ON time of the program 1 flashes.
6
Finally, push PROGRAM button.
Push PROGRAM button within 30 seconds after No. 5 step.
Then, one day timer (Monday in example) is set completely.
ON/OFF is displayed when the present time is included
in the range of the set time.
(In the above status, the contents of the program 1 are
displayed as the present time is included in the range from
ON time to OFF time of the program 1.)
PROGRAM1
PROGRAM2
PROGRAM3
PROGRAM1
PROGRAM2
PROGRAM3
PROGRAM1
PROGRAM2
PROGRAM3
PROGRAM1
PROGRAM2
PROGRAM3
RBC-EXW21E