Toshiba RAV-SM560A - Manual (Page 72)

–
148
–
9. How to change the program operation time
10. How to clear the program operation
• Clear of the day of the week
1) Push PROGRAM button.
2) Push DAY button and select the
reserve mark to be cancelled.
3) Push CLEAR button. The program time
disappears.
4) Push PROGRAM button. The operation
reserve indication disappears.
• Clear of a part of the program
1) Push PROGRAM button.
2) Push
DAY
button and select the
reserve mark on a to be cancelled.
3) Push SET button.
4) Push
SET
button again to flash ON
or OFF time of the program to be
cancelled.
5) Push CLEAR button.
Then, a part of the program has been
cancelled. At the same time, the
remained programs are automatically
arranged.
6) Push
PROGRAM
button.
11. How to set up the holiday
• The operation reserve day can be
cancelled by setting up the holiday.
1) Push
CANCEL button. The holiday setup
mark flashes.
2) Push DAY button and select the
holiday setup mark on the day
which the holiday is set.
3) Push SET button. The flashing
holiday setup indication changes
on. ( )
• Clearance of [HOLIDAY] setup
1) Push CANCEL button.
2) Push DAY button and select the
holiday setup mark on the day to
which the holiday is cancelled.
3) Push
SET
button. The holiday setup
mark disappears and the operation
reserve mark appears.
• Explanation of operation
The cancel setting day is temporarily
canceled, and from the next day, the
cancel setup mark
disappears and the
operation reserve mark appears.
CAUTION
• For the day which does not set timer, the
cancellation cannot be set.
WEEKLY TIMER
ERROR
SuMoTuWeTh Fr Sa
PROGRAM1
PROGRAM2
PROGRAM3
CHECK
PROGRAM SET DAY
HH MM CLEAR
CANCEL
11
9
10
1. Push PROGRAM button in the normal display
status.
2. Select the required day reserve mark
by pushing DAY button.
3. Push SET button.
4. Each push SET button, the flashing
part changes in the following figure. Put
the indication on the time to be changed.
5. Using HH / MM buttons, change the time.
6. Push
SET
button.
7. Push PROGRAM button. Then the change
operation has completed.
ERROR
SuMoTuWeTh Fr Sa
PROGRAM1
PROGRAM2
PROGRAM3
WEEKLY TIMER
ERROR
SuMoTuWeTh Fr Sa
PROGRAM1
PROGRAM2
PROGRAM3
CHECK
PROGRAM SET DAY
HH MM CLEAR
CANCEL
2. Operation of program weekly timer and air conditioner
An air conditioner mounted with a program weekly timer is operated on a remote
controller and on the program weekly timer.
(Example) 1) Operation pattern in a day
ERROR
SuMoTuWeTh Fr Sa
PROGRAM1
PROGRAM2
PROGRAM3
ON :
Air conditioner
operation
OFF :
8:00
ON
12:40
ON
12:00
OFF
16:50
OFF
19:00
OFF 17:00
ON
Push Push Push Push
Program timer
ON/OFF setup
Remote controller
operation
Start/Stop button
SuMo
No timer operation
(No reserve)
No timer operation
(Reservation is canceled as holiday)
Timer operation
TuWeTh Fr Sa
12. Matters to be memorized
1. Power failure
When a power failure occurred and the power supply
has been reset, the display of the right figure appears.
(A colon “
: ” flashes.)
• Resuming of operation
1) Turn on the power (breaker) of the air condi-
tioner.
2) Start operation by the remote controller.
3) Push PROGRAM button of the program weekly timer.
The flashing colon “ : ” changes to the clock
display in the normal status. In this case, the
program is memorized by the backup function.
Therefore, it is unnecessary to set the program
again.
2) Operation pattern in a week
RBC-EXW21E