Toshiba RAV-SM560A - Manual (Page 71)

–
147
–
6. Set error
If flashing
ERROR
is displayed when the program operation has been set up, correct the
time following the procedure below.
1. When flashing ERROR is displayed, ON time of the failed program flashes.
2. Push SET button to flash the time to be corrected.
3. Using HH / MM buttons, correct ON/OFF time.
4. Push
SET
button. When the setup is correctly performed,
ERROR
display disappears.
5. The correction has completed by pushing PROGRAM button.
CAUTION
• When ON/OFF time is set as follows, ERROR is displayed.
1) When a part of the operation time makes inroads into a part of another operation time
ERROR
SuMoTuWeTh Fr Sa
PROGRAM1
PROGRAM2
PROGRAM3
Example: ON time OFF time
2) When OFF time is ahead of ON time
Example: ON time OFF time
3) When ON time is same as OFF time
Example: ON time OFF time
4) ON time or OFF time is singly set up
Example: ON time OFF time
[Is not set]
• The following cases are not set error.
1) OFF time of the previous cycle is same as ON time of the next cycle.
Example: ON time OFF time
2) When the next cycle is set to the time before the
set time of the previous cycle
Example:
ON time
OFF time ON time OFF time
Pushing the
PROGRAM
button changes the order in order of time.
3) When both ON and OFF times are same
Example: ON time OFF time
0:00 23:59
ON OFF
ON OFF
0:00 23:59
OFF ON
0:00 23:59
ON OFF
0:00 23:59
ON OFF
0:00 23:59
ON OFF
ON OFF
0:00 23:59
ON OFF
ON OFF
Continuous operation
for 24 hours
7. How to copy the program operation time
When setting the program operation, already set program can be copied and set to
the other day of the week.
<Example: To copy the operation contents of Monday to Tuesday>
1. Push CHECK button in normal display.
2. Push DAY button and put the operation reserve
indication on the day of the week of which the
program operation is already set.
(Monday in the example)
3. Push PROGRAM button.
Present day of the week indication and Operation
reserve indication flash.
4. Push DAY button and put the present day of the
week indication on the day of the week to be copied.
(Tuesday in the example) (For continuous copying,
push
SET button, and then push DAY button.)
1
Push CHECK button.
<Example: Case to check the program
operation time of Wednesday in Monday>
• The operation reserve indication flashes in
the normal display status.
CAUTION
1. While reserve indication is
flashing, the display does not
change even if other buttons are
pushed than
DAY , CHECK , and
PROGRAM button.
2. If 30 seconds have passed while
the reserve indication is flashing
without pushing
DAY , CHECK or
PROGRAM button, the display returns
automatically to the original
display. (Normal display)
5. Push PROGRAM button. The operation reserve indication goes on under the copied day of
the week.
8. How to check the program operation time
2
Push DAY button and put the operation
reserve indication on the day of the week
to be checked.
• Every pushing DAY button, the operation
reserve indication flashes and the contents
of program operation time of the day of the
week on which the operation reserve
indication has been put on is displayed.
WEEKLY TIMER
ERROR
SuMoTuWeTh Fr Sa
PROGRAM1
PROGRAM2
PROGRAM3
CHECK
PROGRAM SET DAY
HH MM CLEAR
CANCEL
WEEKLY TIMER
ERROR
SuMoTuWeTh Fr Sa
PROGRAM1
PROGRAM2
PROGRAM3
CHECK
PROGRAM SET DAY
HH MM CLEAR
CANCEL
1,
3
2
3
Push CHECK button.
• It turns to be normal indication.
ERROR
SuMoTuWeTh Fr Sa
PROGRAM1
PROGRAM2
PROGRAM3
ERROR
SuMoTuWeTh Fr Sa
PROGRAM1
PROGRAM2
PROGRAM3
RBC-EXW21E