Metrohm 743 Rancimat - Manual (Page 71)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 4 Operation
743 Rancimat ￭￭￭￭￭￭￭￭ 63
per block
The 4 channels of a block can be started and stopped jointly.
Stop criteria
Time
on | off (Default value: off)
Time until the automatic stop of the determination.
Range 0.1 ... 9999 h
Conductivity
on | off (Default value: off)
Conductivity limit value. If this value is reached, the determination is
ended automatically.
Range 1 ... 400 µS/cm
Endpoint(s)
on | off (Default value: off)
Automatic stop of the determination, as soon as every active channel has
reached all endpoints (induction time and stability time).
Table 2 Overview of stop criteria
Time Conductivity Endpoint(s) Analysis stops...
not automatically.
✔ after the time entered, independently of reach-
ing the induction/stability time (endpoint).
✔ after reaching the conductivity entered, inde-
pendently of reaching the induction/stability
time (endpoint).
✔ after reaching the induction and stability time
(endpoint) defined on the Evaluation tab. If
the induction and stability time are evaluated,
both endpoints have to be found.
✔ ✔ after reaching the first criterion (time or con-
ductivity), independently of reaching the induc-
tion/stability time (endpoint).
✔ ✔ after reaching the first criterion (time or end-
point). If the time entered has been reached,
there is no further measuring until the induc-
tion/stability time (endpoint) has been reached.