Metrohm VESUV - Manual (Page 49)

44
• 5. Datalogger
Vesuv 3.0
When you make new settings for the COM port or change it
you should check the communication, see page 41.
Device monitoring
Menu item: "Device, Properties, Monitoring"
Toolbar:
Mouse:
right mouse button in device window
Keyboard: Alt + Enter
The times for three different device conditions can be moni-
tored: Calibration, GLP test and service interval. When the
monitoring interval has elapsed a message is produced by
the PC. The corresponding test is activated by .
When the monitoring function responds a message is pro-
duced in the lower left part of the window. This message can
be edited with the <Message text> button.
<Edit dates> You can set the time interval or date to be
monitored, see below.
<Confirm test> When you have carried out the test you can
confirm it. Confirmation resets the time counter
to zero or produces a query for the next moni-
toring date, see page 46.
<Show log file> You can view the device monitoring log file,
see page 46.
<Message text> You can enter a message. This message
appears on the PC when the monitoring interval
has expired, see page 47.
Monitoring, editing dates
Menu item "Device, Properties, Monitoring, <Edit dates>"
This is where the dates for the device monitoring functions
are edited. When the set date is reached a message is
shown on the PC.
Interval
Select "Interval" if the monitoring is to respond at fixed time
intervals, e.g. daily or weekly.
Interval Select:
. Hours
. Days
. Weeks