Metrohm VESUV - Manual (Page 55)

50
• 5. Datalogger
Vesuv 3.0
1. Mark the empty box and press the button
.
2. Give the command a name, e.g. "Hello in
1st line".
3. Enter the command which is to be trans-
mitted to the instrument, e.g.
&I.A.D.L1"Hallo".
When the command is to be transmitted, if
the box is , enter the command in the in-
put line "Command for checked". If it is en-
tered in the input line "...not checked" then
the command will be transmitted to the de-
vice when the box is not active.
The function "Vesuv can send data to de-
vice" under "Communication" must be acti-
vated. The commands are sent when the
Datalogger is started, when a new configu-
ration is opened and when the options in
the dialog window "Properties" are ac-
cepted, if settings for locking and transmis-
sion functions have been altered.
The entries can be deleted with a double-
click on the corresponding instrument line or
processed with the button and deleted
with .