Metrohm VESUV - Manual (Page 63)

58
• 5. Datalogger
Vesuv 3.0
•
At the end of the titration wait at least until the timeout
has elapsed before you start up the device again, as oth-
erwise the balance will not be assigned.
•
Automatic assignment of the balance is not possible if
you want to fill a silo memory in the device. In such a
case the balance must be assigned manually.
•
The assignment of several balances automatically is not
recommended.
In contrast, operation with one automatically assigned
balance which serves several devices and one balance
which is manually assigned can be a good idea.
Detach balance
Menu item: "Device, Balance, Detach balance"
Toolbar:
Use this command to detach a balance, i.e. so that it is not
assigned to any device window. This command is only active
when the balance has been manually assigned.
If you want to assign the balance to a different device window
you can do this directly with the command "Assign balance"
without needing to detach the balance first.