Banner EZ-SCREEN­ Safety Light Curtain Systems - Manual (Page 22)

WARNING: Proper Orientation of System Emitters and Receivers
EZ-SCREEN Type 2 System emitters and receivers must be installed with their corresponding cabled
ends pointing in the same direction (for example, both cabled ends facing up). Failure to orient them prop-
erly will impair the performance of the EZ-SCREEN Type 2 System and will result in incomplete guarding,
and could result in an increased risk of harm.
R
R
E
E R
E
R
E
E = Emitter R = Receiver E = Emitter R = Receiver
a. Two systems in a horizontal plane b. Two or three systems stacked (or alternate receiver/emitter po-
sitions)
R2
E2
R1
E1
R 3
E 3
R 1
E1
R2
E 2 A
E1 = Vertical Emitter E2 = Horizontal Emitter
R1 = Vertical Receiver R2 = Horizontal Receiver
A = Opaque Shield
E1 = Emitter #1 E2 = Emitter #2 E3 = Emitter #3
R1 = Receiver #1 R2 = Receiver #2 R3 = Receiver #3
c. Two systems at right angles d. Multiple systems
Figure 9. Installation of multiple systems
EZ-SCREEN® Type 2 Light Screen Instruction Manual
22 www.bannerengineering.com - tel: 763-544-3164 122452 rev. B