Banner EZ-SCREEN­ Safety Light Curtain Systems - Manual (Page 55)

Bracket Dimensions
The following are end cap and center bracket dimensions for brackets supplied with each EZ-SCREEN Type 2 emitter or receiver. All
brackets have a thickness of 2.3 mm, and are black zinc plated with a chromate dip finish. Bracket mounting hardware is included.
Standard End Cap Brackets
Model USMB-1
10.7 mm
(0.42") 12.7 mm
(0.50")
15.7 mm
(0.62")
23.2 mm
(0.91")
26.7 mm
(1.05")
27.2 mm
(1.07")
ø15.2 mm
(4.53")
6.4 mm
(0.25")
2 x ø4.8 mm
(0.19") 14.0 mm
(0.55")
15.7 mm (0.62")
31.9 mm
(1.25")
20.0 mm
(0.79")
7.1 mm
(0.28")
5.8 mm
(0.23")
42.4 mm
(1.67")
2.3 mm
(0.09")
Slots have clearance for
M3 screws (supplied) and
allow for ±30° rotation
EZ-SCREEN® Type 2 Light Screen Instruction Manual
122452 rev. B www.bannerengineering.com - tel: 763-544-3164 55