Banner U-GAGE T30UX Ultrasonic Sensors - Manual (Page 11)

Quick-Disconnect Cables
4-Pin Threaded M12/Euro-Style Cordsets with Shield
Model Length Style Dimensions Pinout
MQDEC2-406 1.83 m (6 ft) Straight
44 Typ.
ø 14.5
M12 x 1
2
3
4
1
1 = Brown
2 = White
3 = Blue
4 = Black
MQDEC2-415 4.57 m (15 ft)
MQDEC2-430 9.14 m (30 ft)
MQDEC2-406RA 1.83 m (6 ft) Right-Angle
32 Typ.
[1.26"]
30 Typ.
[1.18"]
ø 14.5 [0.57"]
M12 x 1
MQDEC2-415RA 4.57 m (15 ft)
MQDEC2-430RA 9.14 m (30 ft)
Brackets
All measurements are in mm.
SMB30A
• Right-angle bracket with
curved slot for versatile
orientation
• Clearance for M6 (¼ in)
hardware
• Mounting hole for 30 mm
sensor
• 12-ga. stainless steel
45
61
69
A
B
C
Hole center spacing: A to B=40
Hole size: A=ø 6.3, B= 27.1 x 6.3, C=ø 30.5
SMB1815SF
• Swivel with set screws for
mounting sensors by the
cable hub
• Black reinforced thermo-
plastic polyester
• Stainless steel swivel lock-
ing hardware and hex
wrench included
51
39
B
A
25
Hole center spacing: A = 36.0
Hole size: A = ø 5.0, B = ø 15.0
SMB30FA
• Swivel bracket with tilt and
pan movement for precise
adjustment
• Mounting hole for 30 mm
sensor
• 12-ga. 304 stainless steel
• Easy sensor mounting to
extrude rail T-slot
• Metric and inch size bolt
available
A
B 68.9 36.3
83.2
SMB30SC
• Swivel bracket with 30 mm
mounting hole for sensor
• Black reinforced thermo-
plastic polyester
• Stainless steel mounting
and swivel locking hard-
ware included
67
58
29
B
A
Hole center spacing: A=ø 50.8
Hole size: A=ø 7.0, B=ø 30.0
U-GAGE® T30UX Series with Discrete Output
P/N 138381_web
Rev. G www.bannerengineering.com - tel: 763-544-3164 11