Banner PresencePLUS BCR 1.3 Series - Manual (Page 104)

7.3.1 Barcode Tool
The Barcode tool is more of an appliance than a generic vision tool. The tool is easy to use: push one button
and it just works. In addition to decoding the data present in the barcode symbol, the Barcode tool also grades
the symbol according to ISO-specified quality parameters. These grades are meant to test whether the physical
barcode symbol was printed correctly. Both linear codes and the 2D data matrix codes are graded-- each
according to a different ISO standard. In the linear case, the spec is ISO 15416. For the Data Matrix, the
relevant document is ISO 15415.
Fields
The following are fields on the Barcode tool Input tab:
• Barcode Type7.3.1.1 Barcode Type on page 105
• Results7.3.1.2 Results on page 106
Supported Platforms
BCR/BCR
1.3 GEO/GEO
1.3 EDGE/EDGE
1.3 AREA/AREA1.3 OMNI/OMNI
1.3 OMNI Color ProII/ProII
1.3 ProII Color
Yes No No No Yes Yes Yes Yes
Barcode Input Tab
P/N 000000 Banner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com
Tel: 763.544.3164
104
7/2009 PresencePLUS Software Tools