Banner PresencePLUS BCR 1.3 Series - Manual (Page 250)

9.3 Teach Screen
To display the Teach screen, click the Teach button on the Main Menu toolbar, or click the Next button on the
Tools screen Build tab.
Use the Teach screen to automatically set judgment tolerances to accommodate all variations of good product.
After teaching the inspection, typically proceed to the Run screen to run it.
Note: Before entering the Run screen, a pop-up prompts the user to save the inspection. Save
the inspection to one of the memory locations on the Sensor. As an alternative to teaching, enter
judgment tolerances in the Results tab in the Test tool, and run the inspection without teaching.
9.3.1 Teaching an Inspection
Teaching on a number of known good samples finds acceptable variations and automatically sets the judgment
tolerances to accommodate the full range of acceptable results.
P/N 000000 Banner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com
Tel: 763.544.3164
250
7/2009 Teach