System setup window overview, 6system setup window overview – Banner PresencePLUS BCR 1.3 Series User Manual
Page 45
6
System Setup Window Overview
To access the System Setup window, click the System button in the Main Menu toolbar on the applcation window.
To clear changes, click Cancel. To save changes and exit the System Setup window, click OK.
To exit the System Setup window without changes, click the X in the upper-right corner of the window.
Note: To make changes to the sensor selections, an inspection must not be running. To stop a running
inspection, click the Stop button in the Run tab. To save changes, click OK before exiting the tab or
closing the window.
The System Setup Window includes the following tabs:
•
Sensor Select Tab6.1 Sensor Select Tab
on page 46
•
Communication Tab6.2 Communication Tab
on page 51
•
Input/Output Tab
•
on page 84
•
on page 85
•
on page 86
•
Start-Up Inspection Tab6.7 Start-Up Inspection Tab
on page 87
•
on page 89
•
on page 90
•
Tools Configuration6.10 Tools Configuration
on page 91
System Setup Window
P4 System Setup Window
45
Banner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com
Tel: 763.544.3164
P/N 000000