Run screen, 10 run screen – Banner PresencePLUS BCR 1.3 Series User Manual
Page 255
10
Run Screen
Use the Run screen to start, stop, monitor, and log an inspection. To display the Monitor tab on the Run screen,
click Run in the Main Menu toolbar. The Monitor tab is the default tab in the window.
To exit the Run screen, verify that Run is stopped, and click another destination on the Main Menu toolbar.
While running an inspection, you can monitor the following:
• Pass and Fail counts
• The status of inputs, outputs, Product Select System errors, and whether the Sensor is Ready
• Next Pass, Next Fail, Next Remote Teach, Next Remote Teach Fail, Next, None
To run an inspection, set options and preferences, and click the Start button.
Fields in the Monitor tab are explained below.
Run Screen Monitor Tab
255
Banner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com
Tel: 763.544.3164
P/N 000000