Banner SureCross DX80 Wireless Networks - Manual (Page 16)

Save Device Data
To save the configuration file of a specific device:
1. Select the device from the dropdown list.
2. Click on the browse button to select a location and file name on your harddrive.
3. After the path and file name automatically fill in the File: box, click on the Save Device button to save the configuration file to the
selected location on your harddrive.
Load Device Data
To load a saved configuration to a specific device:
1. Select the target device from the dropdown list.
2. Click on the browse button to select the saved file from your harddrive.
3. After the path and file name automatically fill in the File: box, click on the Load Device button to upload the configuration to the
selected device.
To only load I/O setting data to the selected device, select the Only Load I/O Settings checkbox before clicking the Load Device button.
Network Formation
The Network Formation screen displays the wireless network and the radio communication signal strength between each Node and the
Gateway.
In the sample network shown, there are only two devices: the Gateway and one Node. To populate this screen, click on the Get Network
button. The software reads the Gateway and displays all Nodes wirelessly linked to this Gateway, as well as the radio communication
SureCross User Configuration Tool (UCT)
16 www.bannerengineering.com - tel: 763-544-3164 Rev. G