Cisco XR 12404 - Manual (Page 126)

Chapter 5 Maintaining the Router
Tools and Equipment
5-2
Cisco XR 12404 Router Installation Guide
OL-13830-02
• Removing and Replacing the Air Filter, page 5-8
• Removing and Replacing the Fan Tray Assembly, page 5-11
• Removing and Replacing an AC Power Entry Module, page 5-14
• Removing and Replacing a DC Power Entry Module, page 5-17
• Removing and Replacing a DC PDU, page 5-21
• Removing and Replacing an RP or Line Card, page 5-29
• Removing and Replacing a Consolidated Switch Fabric Card, page 5-36
• Upgrading the RP and Line Card Memory, page 5-38
Tools and Equipment
The following section lists tools and equipment for unpacking, performing
maintenance, and setting up your Cisco XR 12404 Router.
• ESD-preventive strap
• 3/16-inch flat-blade screwdrivers
• 1/4-inch flat-blade screwdrivers
• 9/15-inch (14-mm) wrench
• 3/4-inch (19-mm) socket and ratchet wrench
• 2-mm allen wrench
• Vacuum cleaner
• Antistatic bag (or similar ESD-preventive container)
• Number 2 Phillips screwdriver
todd.book Page 2 Monday, March 16, 2009 2:47 PM