Cisco XR 12404 User Manual
Page 150
Advertising
Chapter 5 Maintaining the Router
Removing and Replacing a DC PDU
5-26
Cisco XR 12404 Router Installation Guide
OL-13830-02
Step 11
Power on the circuit breakers assigned to the DC power source.
Step 12
Power on both PEMs.
•
The green Input OK and Output OK LEDs should be on.
•
The amber Output Fail LED should be off.
See the
“Troubleshooting the DC PDU Installation” section on page 5-27
if the
PEM does not power on correctly.
todd.book Page 26 Monday, March 16, 2009 2:47 PM
Advertising