Cisco XR 12404 - Manual (Page 84)

Chapter 3 Installing the Router
Installing a Flash Memory Card
3-19
Cisco XR 12404 Router Installation Guide
OL-13830-02
The software configuration register is set to 0x0102, which causes the router to
boot automatically from the Cisco IOS XR software image stored on the Flash
memory card.
• The Flash memory card that shipped with your system is installed in the
bottom slot, PCMCIA slot 0 of the RP (
Figure 3-12 ).
Figure 3-12 Flash Memory Card Slots
Figure 3-13 PRP-3 External CompactFlash
SLO
T-0 SLO
T-1
RESET
AU
X
EJECT
57080
272394
EJEC
T
todd.book Page 19 Monday, March 16, 2009 2:47 PM