Cisco XR 12404 User Manual
Page 120
Chapter 4 Troubleshooting the Installation
Troubleshooting the Processor Subsystem
4-22
Cisco XR 12404 Router Installation Guide
OL-13830-02
Table 4-6
Dual PRP-3 Scenario
LED Display
Description or Console Message
INIT/NV
Displays the LED message during the initialization of the NVRAM infra code.
02A8/HW
OK/RIO
LED message displayed immediately after the board is powered on.
OK/CPU
SENT/RPT
Displays "1.330GHz dual-core MPC8641D Rev 2.1, 532MHz MPXclk".
INIT/MEM
Displays "Discovering memory in slot DIMM1 ......................... Found 2GB
DIMM
Discovering memory in slot DIMM2 ......................... Found 2GB DIMM"
TEST/MEM
Displays "Testing low memory ....................................... OK
Loading main ROMMON image ................................ OK
Verifying loaded image ................................... OK
Load succeeded; launching target ......................... OK"
LNCH/RMON
Displays “Cisco ROMMON System Bootstrap, Version 0.16.0 (bld1)
DEVELOPMENT SOFTWARE
Compiled on 08/27/08 at 15:04:49 PDT [BLD-rommon]
Copyright (c) 1994-2008 by Cisco Systems, Inc.
MPC8641D platform with 4 GB of main memory"
RDY/RP
or
PWRD
DISPLAYS "Loading disk0:c12k-os-mbi-3.8.0.15I/mbiprp-rp.vm (14809672
bytes)... !!!"
Tip
Instead of RDY/RP, sometimes PWRD is displayed in the normal
booting process.
todd.book Page 22 Monday, March 16, 2009 2:47 PM