Cisco XR 12404 - Manual (Page 11)

xi
Cisco XR 12404 Router Installation Guide
OL-13830-02
Preface
Purpose
Purpose
This installation and configuration guide explains the hardware installation and
basic configuration procedures for a Cisco XR 12404 Router. It contains
procedures for installing the hardware, creating a basic configuration file, and
starting up the router.
Installation Guide Organization
The Cisco XR 12404 Router Installation Guide has the following chapters and
appendix; the paper version of this document may contain an index.
• Chapter 1, “Cisco XR 12404 Router Overview” —Contains a high-level
system overview and physical description of the major components of a
Cisco XR 12404 Router including the power and cooling systems, the power
requirements, the Route Processor (RP), PRP-3, and the consolidated switch
fabric (CSF) card which contains the clock and scheduler, alarm and switch
fabric functions.
• Chapter 2, “Preparing for Installation” —Contains safety, site requirements
for power, environmental safety, cabling, rack-mounting, electrostatic
discharge (ESD), the site log, and site preparation checklist.
• Chapter 3, “Installing the Router” —Contains procedures for verifying the
Cisco XR 12404 Router installation, grounding, cable connection, AC-and
DC-power source and powering-up the router.
• Chapter 4, “Troubleshooting the Installation” —Contains procedures for
identifying and solving problems that may occur during installation.
• Chapter 5, “Maintaining the Router” —Contains safety at the field
replaceable unit (FRU) level, removal and replacement procedures for
field-replaceable units, FRU assemblies, and associated procedures to
troubleshoot and verify each FRU.
• Appendix A, “Technical Specifications” —Contains Cisco XR 12404 Router
specifications.
• Index—Contains a keyword and subject index of pertinent terms and
information.
todd.book Page xi Monday, March 16, 2009 2:47 PM