Cisco XR 12404 - Manual (Page 165)

A-3
Cisco XR 12404 Router Installation Guide
OL-13830-02
Appendix A Technical Specifications
Product Architecture
Specifications
Table A-2 lists Cisco XR 12404 Router physical specifications. Table A-3 lists
the environmental specifications.
Feature Description
Power
Requirements
110V AC power, sufficient to manage three OC-192c/10GE
capable line cards and one 10G capable RP.
Total power supplied to the system should not exceed
1200VA
Two AC or DC power supplies in redundant configuration
should be able to support the entire power needs of the
chassis.
Power Supply
Redundancy Redundant and load sharing AC power entry module (PEMs),
or
Redundant and load sharing DC PEMs and DC power
distribution units (PDUs)
Route
Processors Supports up to 2 RPs per system
The second RP can be used in any slot
1
The first RP is inserted in slot 0 (1.25 inch height)
Route
Processor
Redundancy Supports online insertion and removal, hot swappable
RP redundancy
Switch Fabric The switch fabric supports up to 80 Gbps of capacity
NEBS The Cisco 12404 Inernet Router is designed to comply with
NEBS Level 3 certification
1. A narrow card filler panel must be used to ensure proper air flow through the chassis and
electromagnetic compatibility (EMC)
Table A-1 Cisco XR 12404 Router Product Architecture (continued)
todd.book Page 3 Monday, March 16, 2009 2:47 PM