Cisco XR 12404 - Manual (Page 48)

Chapter 2 Preparing for Installation
Tools and Equipment
2-2
Cisco XR 12404 Router Installation Guide
OL-13830-02
Tools and Equipment
The Cisco XR 12404 Router is designed to be installed with a minimum number
of tools. The following tools are required.
• 1/4-inch flat-blade screwdriver
• 3/16-inch flat-blade screwdriver
• 9/16-inch wrench
• 10-mm wrench (either open-end or socket)
• 2-mm allen wrench
• ESD-preventive wrist or ankle strap
• Antistatic mat
• Tape measure
• Wire cutters
• Pliers
Safety and Compliance
The following guidelines will help to ensure your safety and protect the
equipment. This list is not inclusive of all potentially hazardous situations, so be
alert.
• General Safety Guidelines, page 2-3
• Preventing Electrostatic Discharge Damage, page 2-4
• Laser Safety, page 2-6
• Laser Safety, page 2-6
• Lifting Guidelines, page 2-6
todd.book Page 2 Monday, March 16, 2009 2:47 PM