Cisco XR 12404 - Manual (Page 63)

2-17
Cisco XR 12404 Router Installation Guide
OL-13830-02
Chapter 2 Preparing for Installation
Transporting a Cisco XR 12000 Series Router
If you do not receive everything you ordered, contact a customer service
representative for assistance. See the section titled,
“Obtaining Documentation
and Submitting a Service Request” section on page -x .
Transporting a Cisco XR 12000 Series Router
The shipping package for Cisco XR 12000 Series Routers is engineered to reduce
the potential of product damage associated with routine material handling
experienced during shipment. To minimize potential damage to the product,
transport these products in their Cisco-specified packaging. Failure to do so may
result in damage to the router or degradation of its performance. Also, do not
remove the Internet router from its shipping container until you are ready to install
it. The router should always be transported or stored in an upright position. Keep
the router in the shipping container until you have determined a location for
installation.
Site Preparation Checklist
Your Cisco XR 12404 Router is shipped with a site log ( Table 2-1 ). Keep your site
log in a location near the router where anyone who performs tasks can have access
to it. Site log entries might include the following.
• Installation Progress—Make entries in the site log to record installation
progress. You can note any difficulties encountered and remedies during the
installation process.
• Upgrades, Removals, and Replacement Procedures—Use the site log as a
record of system maintenance and expansion history.
– FRU installed, removed, or replaced
– Cisco XR 12404 Router configuration changes
– Software upgrades
– Corrective or preventive maintenance procedures performed
– Intermittent problems
– Your comments
todd.book Page 17 Monday, March 16, 2009 2:47 PM