Tweco Pak 200 - Manual (Page 25)

Manual 0-5057 2-7 SPECIFICATIONS
SPECIFICATIONS PAK 200
C. Torch Parts (Generic Parts Shown)
Electrode
Shield Cup Tip
Gas
Distributor
Torch Head
Water Tube Extension
(Gouging Only)
A-02188
Figure 2-11: Torch Parts
D. Parts - In - Place (PIP)
The torch is designed for use with a power supply which senses coolant return fl ow to confi rm that torch
parts are in place. If coolant return fl ow to the power supply is absent or insuffi cient the power supply will
not provide power to the torch. Coolant leakage from the torch also indicates that torch parts are absent or
installed improperly.
E. Type Cooling
Combination of gas stream through torch and liquid cooling.