Cyanuric acid – LaMotte SMART Spectro Spectrophotometer User Manual
Page 148
CYANURIC ACID
MELAMINE METHOD–TURBIDITY • CODE 366I-01-SC
QUANTITY
CONTENTS
CODE
2 x 100 mL
*Cyanuric Acid Test Solution
*4856-J
1
Syringe, 5 mL
0807
*WARNING: Reagents marked with an * are considered to be potential health
hazards. To view or print a Material Safety Data Sheet (MSDS) for these reagents
go to www.lamotte.com. To obtain a printed copy, contact LaMotte by e-mail,
phone or fax.
Cyanuric acid is added to swimming pool water as a stabilizing agent for free
chlorine residuals. It minimizes the loss of chlorine from the action of ultraviolet rays
in sunlight. Cyanuric acid levels in pools should be maintained between 25 and
75 ppm and various public health associations recommend that the concentration
should never exceed 100-150 ppm.
APPLICATION:
Swimming pool water.
RANGE:
0–200 ppm Cyanuric Acid
MDL:
16 ppm
METHOD:
A buffered solution of melamine forms a precipitate with
cyanuric acid in proportion to the amount of cyanuric
acid present. The amount of particles in suspension is
measured turbidimetrically.
SAMPLE HANDLING
& PRESERVATION:
Cyanuric acid samples should be analyzed as soon as
possible after collection. Deterioration of the sample
can be minimized by keeping samples in the dark or
refrigerated until analysis can be performed.
INTERFERENCES:
No known interference from compounds normally found
in pool water. Temperature of the sample should be
maintained between 70°F and 80°F for best results.
Check for stray light interference (see page 15).
SMART Spectro Test Procedures 2.11
CYANURIC ACID
Test P
rocedures