Profile series v.g1.5 cylindrical lock – SARGENT Profile Series v.G1.5 Cylindrical Locks User Manual
Page 12
10
800-810-WIRE (9473) • www.sargentlock.com • A7854B
Profile Series v.G1.5 Cylindrical Lock
05/06/09
A7854:B
Copyright
©
2009,
Sargen
t
Manufacturing
Company
,an
A
S
S
A
AB
LO
Y
G
roup
company
.All
right
s
reser
ved
.
Reproduction
in
whole
or
in
par
t
without
the
express
writ
ten
permission
of
S
AR
G
EN
T
Manufacturing
is
prohibited
.
6.10.D–Forced/Propped Door Option (DM-)
Installation
1. ElectroLynx
®
System Wiring Instructions (refer to Fig. 1 and Fig. 2)
a. Look for the mating part on ASSA ABLOY doors & frames. Then plug in all
connectors as shown in Fig. 2 during product installation
b.Hard wire door status switch as shown
2. Non-ElectroLynx
®
System Wiring Instructions (refer to Fig. 1 and Fig. 2)
a. Cut the 4-pin connector off the Forced/Propped harness and hard wire to
non-ElectroLynx
®
two conductor door harness.
b. Hard wire door harness to power transfer device
c. Hard wire door status switch to power transfer device