SARGENT IN100 Mortise Locks - Manual (Page 10)

10 1-800-810-WIRE • www.sargentlock.com • A8122A
Copyright © 2012, Sargen
t Manufacturing Company
, an A
SS
A AB
LO
Y G
roup company
. All right
s reser
ved
.
Reproductions in whole or in par
t without express writ
ten permission of Sargen
t Manufacturing Company is prohibited
.
6/30/12
IN100 Mortise Lock
8 Attach Front Plate
Attach front plate with (2) flat head screws.
Outside of Door
Fig. 8
(2) flat head screws
9 Weather Conduit Installation (Optional P/N 52-2847)
Fig. 9A
Install weather conduit on NON FIRE-RATED, hollow metal, exterior doors only (Fig. 9A).
1. Carefully insert the weather conduit into the ribbon cable hole from he outside
of the door.
2. Place the O-ring around the weather conduit on the inside and up against the
door (Fig. 9B).
Fig. 9B
Ribbon Cable Hole
O-Ring
Inside of Door
Scan this Microsoft® Tag using your mobile phone
to see a video of this installation step. The Microsoft
Tag mobile app is required to scan the Tag.
Download the free mobile app at http://gettag.mobi