SARGENT 776 Controls - Manual (Page 2)

Installation Notes
1. With new applications, a raceway harness with 8 & 4-pin connectors will be pre-installed inside
door by ASSA ABLOY door manufacturer when specified during the ordering process. Raceway
harness kits are also available for retrofit applications.
2. If door does not have a raceway harness with connectors, consult factory for raceway harness
retrofit kit or cut connectors off product and hardwire as required.
3. Wiring to pigtail harness is per facility wiring requirement. Follow individual instructions below.
Connector System notes:
The system is designed to be installation friendly with connectors from the electric hinge through
the door to the lock. The only wiring is to the loose wires on the pigtail harness assembly on the
frame side of the electric hinge.
IMPORTANT:
The plug and receptacle connectors are designed to mate and lock together (Fig. 1). Plug the
connectors into each other with the locking mechanism aligned as indicated.
Do NOT force connectors on any other way.
8-Pin Connector
Receptacle
Locking mechanism
Plug
Fig. 1
2 1-800-810-WIRE • www.sargentlock.com • A7725B
Copyright © 2013, Sargen
t Manufacturing Company
, an A
SS
A AB
LO
Y G
roup company
. All right
s reser
ved
.
Reproductions in whole or in par
t without express writ
ten permission of Sargen
t Manufacturing Company is prohibited
.
3/4/13