Great Plains 2025P Operator Manual - Manual (Page 44)

2025P, 2020P Bedded, and
2010HDP
118-928M 8/14/2006
42
Changing Seed Meter Wheel for
20 Series Openers
Choose the correct seed meter wheel for the type
of seed you will be using. Be sure to use the same
wheel type on all meters.
To change seed meter wheels:
Refer to Figure 56
1. Shut off seed flow to meters by moving sliding
seed tubes. For more information see page
39.
Refer to Figure 57
2. Clean out meter. For more information see
page 40.
Refer to Figure 58
3. Push in spring-loaded wheel retainer and
turn. Pull off wheel retainer and spring.
Figure 56
Sliding seed tubes shut off
22852
Sliding seed
tubes
Figure 1
Meter clean out
19190 Figure 57
Meter clean out
22857
Wheel retainer
and spring
Figure 58
Remove wheel retainer and spring
22860