Great Plains 2025P Operator Manual - Manual (Page 87)

8/14/2006 118-928M
85 Veris Drive Operating Instructions
Refer to Figure 114
8. Enter number of rows here using Up/Down
arrow keys. Press Function key to advance
to next window.
Refer to Figure 115
9. Enter your planned planting speed using
Up/Down arrow keys. Calibration mode will
not accept a speed higher than 10 mph.
Press Function key to advance to next win-
dow.
Refer to Figure 116
10. Enter the amount of seed you want to mea-
sure. For volumetric metering, this should
be at least 1/4 of a lb. For singulated meter-
ing, at least 100 seeds should be selected.
Press Function key to advance to next win-
dow.
Figure 114
Figure 115
Figure 116
22721
22720
22722