Great Plains 2025P Operator Manual - Manual (Page 68)

2025P, 2020P Bedded, and
2010HDP
118-928M 8/14/2006
66
Meter Maintenance
Meter Slide Maintenance. For proper seeding
operation, seasonally or when changing crops,
check meter slide for wear. If you have a notice-
able increase in seeding rate you may need to
replace the meter slide.
Refer to Figure 86
1. If seed box is not empty, shut off sliding seed
tubes.
Refer to Figure 87
2. Clean out seed meter.
3. Remove wheel retainer and spring. Refer to
page 42 for more information.
Refer to Figure 88
4. Pull seed meter wheel out about 1/4 inch, or
past the wheel drive pin, and spin backward to
clean out seeds from top pockets.
5. Remove the seed meter wheel.
Figure 86
Sliding seed tubes shut off
22852
Sliding seed
tubes
Figure 87
Meter clean out
22857
Figure 88
Remove seed meter wheel
22681
Spin wheel
backward before
removing