Great Plains 2025P Operator Manual - Manual (Page 89)

8/14/2006 118-928M
87 Veris Drive Operating Instructions
Refer to Figure 120
13. Continuing to verify that the drive area
is clear, press the Engage key to start
drive rotation. Pressing Function key
will exit calibration mode.
Refer to Figure 121
14. While the drive is rotating, the display
window shows the time remaining and
the “Out” rate. CONTINUE TO MONI-
TOR DRIVE AREA DURING DRIVE
ROTATION. PRESS THE ENGAGE
KEY (OR OFF KEY) TO STOP DRIVE
DURING CALIBRATION
Refer to Figure 122
15. After Calibration meter rotation has
ended, this screen will appear.
Figure 120
Figure 121
Figure 122
22727
22726
22728