Great Plains 2025P Operator Manual - Manual (Page 91)

8/14/2006 118-928M
89 Veris Drive Operating Instructions
Refer to Figure 126
20. Console window now displays the calibra-
tion number you have selected.
Refer to Figure 127
21. This returns you back to the beginning of
Calibration mode as shown. To re-run the
Calibration procedure, follow the steps out-
lined above. It is suggested that you per-
form the calibration mode at least twice,
and additional replications may be needed
if Target and Actual amounts vary signifi-
cantly.
Figure 126
Figure 127
22732
22733