Great Plains PTO Kits Single-Section - Manual (Page 74)

70 Single-Section PTO Pumps Table of Contents Index Great Plains Manufacturing, Inc.
401-885M Table of Contents Index 2014-06-16
Existing Parts Affected
Call-
out
Part
Number
Part Description Part Disposition
11 <none> HHCS #10-24x1 INCH GRADE 8 FULL THREAD Removed. Not re-used if motor replaced.
12 17089 13 FAN IMPELLER Removed and re-installed.
13 21121 6 FAN HOUSING RH SIDE
14 23320 6 FAN HOUSING LH SIDE
15 23907 HUB/MOTOR PLATE SEAL (2B) If removed, not re-used.
16 401-203H YP FAN MOUNT WLDMNT 2
17 401-537D DJ FAN SENSOR MOUNT BRKT If present, removed and re-installed.
18 401-656H FAN MOUNT WELDMENT
19 800-373C SQ KEY 6MM X 35MM If removed, not re-used.
20 801-081C SCREW HEX SELF TAP 1/4-20X3/4 Removed and re-installed.
21 802-005C HHCS 1/4-20X1 GR5 Removed and re-installed.
22 802-079C HHCS 3/8-16X1 1/4 GR5 Removed and re-installed.
23 802-167C HHCS 1/4-20X1 1/2 GR5 Removed and re-installed.
24 802-224C HHCS 1/4-20X1 1/4 GR5 Removed and re-installed.
25 803-014C NUT HEX 3/8-16 PLT Removed and re-installed.
26 803-230C NUT HEX FLANGE 1/4-20 PLT Removed and re-installed.
27 803-360C NUT HEX FLG 3/8-16 GR8 ZNYCR Removed and re-installed.
28 804-006C WASHER LOCK SPRING 1/4 PLT Removed and re-installed.
29 804-011C WASHER FLAT 3/8 USS PLT Removed and re-installed.
30 804-013C WASHER LOCK SPRING 3/8 PLT Removed and re-installed.
31 804-075C WASHER FLAT 1/4 USS PLT Removed and re-installed.
32 810-037C VALVE LINE CHECK Removed and re-installed.
33 810-556C PARKER F-11 FAN MOTOR If removed, not re-used.
34 811-077C TE 3/4MORB 3/4MJIC 3/4MJIC If removed, re-installed.
35 811-078C TE 3/4MJIC If removed, not re-used.
36 811-079C TE 3/4FJIC 3/4MJIC 3/4MJIC Removed and not re-used.
37 811-088C AD 3/4MORB 3/4MJIC If removed, re-installed.
38 811-125C HH3/8R2 082 3/4FJIC Left in place.
39 811-150C EL 3/4FJIC 3/4MJIC If removed, re-installed.
40 811-237C HH3/8R2 174 3/4FJIC Status depends on kit.
41 811-664C HH3/8R2 38 3/4FJIC Left in place.
42 811-967C HH3/8R2 185 3/4FJIC Status depends on kit.
43 811-980C HH3/8R2 047 3/4FJIC One end re-connected.
44 817-624C FAN INLET RAIN SHIELD If removed, not re-used.
45 841-006C HH3/8R2 087 3/4FJIC One end re-connected.
46 841-042C HH3/8R2 249 3/4MORB 3/4FJIC One end re-connected.
47 841-196C HH1/2R2 024 3/4FJIC If removed, re-installed.
48 841-461C HH1/4 R2 114 9/16 FJIC 9/16MOR Removed and not re-used.
49 841-462C HH1/2 R2 114 3/4FJIC 3/4MORB Two removed. One re-used.