Great Plains 3N-4025P Operator Manual - Manual (Page 158)

154 3N-40P Table of Contents Index Great Plains Manufacturing, Inc.
196-538M Table of Contents Index 2014-01-29
Lubrication
Grease Bank (Option)
Up to 14 zerks each bank, 2 banks each of 3 sections;
6 banks total;
1 zerk per opener; 48 or 64 zerks total
Type of Lubrication: Grease
Quantity: 5 pumps
Note: These zerks are only present if the drill has
frame-mounted coulters. These zerks only serve
the coulter arm pivots. Coulter hub zerks must be
serviced at the hubs.
Parallel Arm Pivots
1 zerk each end of each arm, two arms per assembly,
four arms per drill;
16 zerks total
Type of Lubrication: Grease
Quantity: Until grease emerges
Wing Caster Wheel Pivot
1 zerk each of 2 pivots; 2 total
Type of Lubrication: Grease
Quantity: Until grease emerges
8
50
Multi-purpose
spray lubricant Multi-purpose
grease lubricant Multi-purpose
oil lubricant
Intervals
(operating hours)
at which service
is required
Inspection
34208
20314
8
16170
8
20320