Bio-Rad Econo Gradient Pump Kits User Manual
Page 21
Screen 6. Selecting Units for Programming.
Programming steps can be described in either units of time (in
minutes) or volume (in ml).
6 Program Steps
TIME vol
Pressing the left soft key selects time; the right key selects volume.
Pressing Next advances to screen 8 if a Splitter valve is present or
screen 9 if a Splitter valve is not present.
Screen 7 (not displayed). This is available for future upgrades.
Screen 8. Splitter Valve Period Selection.
The Econo Gradient Pump automatically detects the presence of a
splitter valve. The default period is 2 seconds. This parameter, in
conjunction with the “%-split” parameter, may be varied for stream
splitting, process sampling, or on-line biological activity assays. More
information is included in the splitter valve instruction manual. If you
are uncertain about this value, accept the default of 2 seconds and
adjust it later according to your application needs.
8 Split period
__ sec
Enter a new value for the split period and press Next to advance to
screen 9.
System Operation
17
4006161B.qxd 8/14/2003 8:09 AM Page 17