Bio-Rad Econo Gradient Pump Kits User Manual

Page 29

Advertising
background image

5.5.4 Power Failure While in Run Mode

In the event of a power failure while a Program is running, the LCD
display will indicate:

Power Failure!

CONTINUE stop

If Stop is selected, the program that was running is aborted.
Pressing any key on the front panel will display the Manual mode. If
Continue is selected, the program that was running is resumed at the
point where the power failure occurred.

System Operation

25

4006161B.qxd 8/14/2003 8:09 AM Page 25

Advertising